SteelSeries Rival 600 (wired) -- HID

Devices: 1038:1724 (SteelSeries Rival 600) and 1038:172E (SteelSeries Rival 600 Dota 2 Edition).

Cross-checked against the rivalcfg rival600 profile.

Note

This driver implementation was ported from rivalcfg specifications and is awaiting testing on physical hardware.

USB interfaces

Configuration goes to interface 0 as unnumbered HID reports.

Command acknowledgement: none

Commands on output reports are sent fire-and-forget without command echo on the interrupt IN endpoint.

Commands (output reports, interface 0)

0x03 0x00 -- DPI presets

0x03 0x00 0x01 <v1> 0x00 0x42   # preset 1
0x03 0x00 0x02 <v2> 0x00 0x42   # preset 2

Values correspond to the TrueMove 3+ sensor (100--12000 DPI in steps of 100, mapped linearly as (dpi - 100) / 100 from 0x00 to 0x77).

0x04 0x00 -- polling rate

0x04 0x00 <rate>

  • 0x01 -- 1000 Hz

  • 0x02 -- 500 Hz

  • 0x03 -- 250 Hz

  • 0x04 -- 125 Hz

0x05 0x00 -- zone illumination (8 zones)

0x05 0x00 <led_id> [0x00 x 4] <led_id> <duration_le16> [0x00 x 14] 0x01 [0x00 x 4] 0x01 <R> <G> <B>

Configures lighting for each of the 8 RGB zones:

  • 0x00 -- Wheel LED

  • 0x01 -- Logo LED

  • 0x02 -- Left Strip, Top LED

  • 0x03 -- Right Strip, Top LED

  • 0x04 -- Left Strip, Middle LED

  • 0x05 -- Right Strip, Middle LED

  • 0x06 -- Left Strip, Bottom LED

  • 0x07 -- Right Strip, Bottom LED

0x31 0x00 -- buttons mapping

0x31 0x00 <b1_5B> ... <b7_5B>

Each of the 7 button fields is 5 bytes (35 bytes total):

  • Byte 0: action type (0x01-0x05 for mouse buttons, 0x30 for CPI cycle, 0x31 for scroll up, 0x32 for scroll down, 0x51 for keyboard, 0x61 for media, 0x00 for disabled).

  • Byte 1: keycode or media code when keyboard/multimedia action is selected.

  • Bytes 2--4: padding (0x00).

Default mappings:

  • Button 1: Left Click (0x01)

  • Button 2: Right Click (0x02)

  • Button 3: Middle Click (0x03)

  • Button 4: Side Back (0x04)

  • Button 5: Side Forward (0x05)

  • Button 6: Side Front (Disabled, 0x00)

  • Button 7: CPI Cycle (0x30)

0x09 0x00 -- save to flash

0x09 0x00

Persists the live configuration into onboard flash memory.